Prepac Sonoma 2-Drawer Nightstand - Modern Bedside Table with Open Shelf, Espresso Finish, 23.25"W x 16"D x 28"H - Perfect for Bedroom Storage, Small Spaces & Apartment Living

The quality of workmanship is excellent, and it assembles quite easily. Some folks have complained about the instructions, but I found them to be quite good and fully adequate. Based on other reviews, my first step was to start labeling the pieces with masking tape and a marker. But after about 2 pieces, I realized I was wasting my time. There was no doubt about the identity of each piece, if you look at the diagrams carefully. In fact, the one time I nearly did something wrong, I paused to study the instructions, and the details of the diagram showed the subtle differences in the hole patterns in the board, causing me to flip the piece and continue without further incident. So, just go slowly and carefully on your first one, look at the diagrams carefully until you're sure you have the correct parts laid out in the correct orientation, and you shouldn't have a bit of trouble.I bought two, and the second was short some of the nails used on the back cardboard. No big deal for me, but it might be aggravating for someone without 30 years of accumulated miscellaneous hardware. There were extra of those clever disk doohickeys in both of mine. All in all, I was perfectly satisfied with the contents. Note also that the packaging was excellent, and the parts did not have abraded surfaces from vibration in shipping. I found the tiniest chip in the edge of one of bottom front pieces, and simply colored it in with a dark brown sharpie, and the little white eye-catcher promptly disappeared. Note that you have a choice of bottom effects, if you don't like the gentle arc and prefer something a little more complex. (I like the simplicity of the arc.)I'm not a big fan of particle board furniture, but I needed a temporary solution and didn't want to spend a lot for something I might not keep for more than a couple of years. After assembling these, I find that I like them better than most of the $300+ nightstands I looked at in furniture stores. The drawer hardware is better than many of those units (some just had plastic slides). The overall value of these (looks and utility divided by cost) is incredibly high. Thus, I'm not only pleased that I gambled on these, but I'm also expecting to keep them indefinitely. When I do buy an entire new bedroom set, complete with matching nightstands, these will go into a spare room. I won't throw them away or sell them. They're just too nice.BTW, I was concerned about height, width, depth, drawer depth, etc., and these are just about ideal for my situation. I encourage you to take the published measurements and ensure they'll be appropriate for your bed height, wall space, etc. The only modification I made was to drill a 1" hole in the back of each of the shelf sections (and color the edges with that sharpie marker) in order to feed electric cords through. That was easy to do post-assembly, but you have to be careful with the drill, of course, moving it very slowly into and out of position. Cut gradually, gently through, or you may make a ragged mess. (It's often best to cut partway through, then jump to the other side and finish. This keeps you from busting outward the last layer of material.)In summary, this nightstand is well designed, easy to assemble, and is high quality in every discernible way. It looks good, functions well, and is an outstanding value for the price. No regrets whatsoever in buying.